Wear gloves. Wash hands after use. For interior applications, use in a well ventilated area.
Protect work area. Surfaces to be sealed or bonded must be clean and free from grease. For improved adhesion, roughen very smooth surfaces. Pre-fit all materials before applying product. Pierce tube with the point on the reverse end of cap.
Tools Typically Required:
As an adhesive:
Apply adhesive to both surfaces to be bonded. Wait for 5 minutes until adhesive is tacky and then press surfaces together. Clamp if necessary. Sets in approximately 10 minutes and dries in 24 hours. Dry time is dependent upon temperature, humidity and amount of adhesive used.
As a sealant:
Apply a layer thick bead over the area to be sealed. Tool if desired. Let dry for 24 hours. If necessary apply a second coat.
Have strong adhesive and sealing property for most material, after using, it become Highly flexible, non-corrosive and durable, and resist high temperature, oil resistance. Long life for bonding and sealing.
||silicone gakset maker